COP System Accessories In-Tank Steam Mixer/Sparger
The steam mixer/sparger mixes steam with water in the tank to reduce noise and maximize heating capacity. Steam mixers/spargers are attached to either in-tank piping or a coupling that is mounted through the tank sidewall. Description Steam Inlet Connection Tank Connection Length Part #
0.5" MNPT
3.0" TC
8.69"
252795
316L stainless steel with one- piece ferruled assembly
0.75" MNPT
3.0" TC
9.44"
252790
1.0" MNPT
3.0" TC
8.13"
252792
NOTE: Sizing is determined by the line size & steam valve through which steam is delivered. NOTE: For older models with coupling welded into sidewall call a Sani-Matic sales representative.
Steam Regulator Valve The steam regulator automatically controls the temperature of your cleaning unit without the use of external power. With a vapor pressure thermal system, the steam regulator senses temperature change and positions the valve plug to regulate the heating or cooling medium to maintain a desired temperature.
Description
Connection Size
Part #
0.5"
020494 020495 020506
Brass with an FNPT connection type
0.75"
1.0"
NOTE: Maximum temperature setpoint is 170 °F.
Thermowell for Steam Regulator Thermal Bulb
Tri-Clamp x FNPT Fitting Thermowell
Description
Part #
Thermowell, 321 stainless steel tube, 9.25" overall length, 316 stainless steel fitting, 2.0" Tri-Clamp tank connection x 1.0" FNPT Thermowell connection
221907
117
FBC-0001.5
Powered by FlippingBook