Reference: Former Part Number & New Model Number Comparison Reference Model Number Key for selections to be made. Selections are designated by empty green boxes in the table below.
Straight-Line Strainer
LONG Inlet-to-Outlet (36”)
SHORT Inlet-to-Outlet (20 3 / 4 ")
Connection Size
Body Size
Max. gpm
Perforated Old Part #
Perforated New Model Key #
Perforated Old Part #
Perforated New Model Key #
1.5"
4"
70
S10006
SS15T3-P X 4000
S10016
SL15T3-P X 4000
2.0"
4"
130
S10007
SS20T3-P
X 4000
S10017
SL20T3-P X 4000
2.5"
4"
200
S10008
SS25T3-P X 4000
S10018
SL25T3-P X 4000
3.0"
4"
250
S10009
SS30T3-P X 4000
S10019
SL30T3-P
X 4000
4.0"
4"
275
S10010
SS40T3-P X 4000
S10020
SL40T3-P X 4000
Connection Size
Body Size
Max. gpm
Wedgewire Old Part #
Wedgewire New Model Key #
Wedgewire Old Part #
Wedgewire New Model Key #
1.5"
4"
70
S10126
SS15T3-W X 4000
S10136
SL15T3-W X 4000
2.0"
4"
130
S10127
SS20T3-W X 4000
S10137
SL20T3-W X 4000
2.5"
4"
200
S10128
SS25T3-W X 4000
S10138
SL25T3-W
X 4000
3.0"
4"
250
S10129
SS30T3-W X 4000
S10139
SL30T3-W
X 4000
4.0"
4"
275
S10130
SS40T3-W X 4000
S10140
SL40T3-W X 4000
Cv Values & Pressure Drops for Straight-Line Strainers
Cv values or the provided pressure drop tables can be used to estimate the pressure drop across a strainer for a strainer specification at a given flow rate. Contact Sani-Matic for inquiries on pressure drops for fluids with other viscosities.
Body Length
Connection Size
Cv
1.5"
45
2.0"
80
Short & Long (20.75" & 36")
2.5"
100
3.0"
105
4.0"
100
Straight-Line Strainer Pressure Drop
NOTE: Cv values and charted pressure drops can be used for perforated, wedgewire, and perforated with mesh overlays or filter tubes. The clean pressure drop is minimally impacted by the element configuration in most cases. For worst-case calculations, add 20% to the calculated pressure drop.
28
sanimatic.com
Powered by FlippingBook