QUICK TIPS Is there a way to monitor rotation?
Because the TANKO MX is geared and media-driven, it can be monitored with sensors for proof of rotation. The AWH CIPGuard (TCG-ZR) is available for monitoring proof of rotation. GOOD TO KNOW · Vertical positioning is recommended to avoid reduced service life · Fully drainable in a vertical or horizontal position · The MX150-G12 is a two-nozzle option available, if you have a relatively small insertion port but require spray throw distance. (This item is not featured in the catalog but is available through Sani-Matic Representatives.) · Cleaning cycle times are dependent on operating pressure - the higher the pressure, the higher the RPM, and the shorter the overall cleaning cycle. · Surface finish of materials of construction ore 32 µin Ra, however some surfaces may not be measurable or accessible due to the design.
TANKO MX Jet Spray Device
Max. Cleaning Radius (ft)
Connection Style
Flow (gpm)
Pressure (psi)
Model
Spray Pattern
Spray Nozzle Connection Size
Part #
360 ° Full Coverage Nozzle Spray 360 ° Full Coverage Nozzle Spray 360 ° Full Coverage Nozzle Spray 360 ° Full Coverage Nozzle Spray
TANKO MX125
Four (4) 5.0 MM Nozzles
1.00"
FNPT
17 - 44 44 - 145 13.0
053597
TANKO MX125
Four (4) 6.0 MM Nozzles
1.00"
FNPT
17 - 44 44 - 145 13.0
053598
TANKO MX150
Four (4) 7.0 MM Nozzles
1.50"
FNPT 45 - 81 43.5 - 116 24.0
053600
TANKO MX150
Four (4) 8.0 MM Nozzles
1.50"
FNPT 45 - 81 43.5 - 116 24.0
053599
NOTE: Green highlighted cells indicate stocked items.
TANKO MX Replacement Parts Model
Description
Part #
TANKO MX125 / MX150
Wear Parts Kit
053553
NOTE: Green highlighted cells indicate stocked items.
TANKO MX Accessories For proof of rotation sensor, see CIPGuard ® product on page 87.
82
sanimatic.com
Powered by FlippingBook