Bio-Pharm
Hygienic Spray Deflector: The Solution to Spray Overflow.
Sani-Matic's patent-pending Hygienic Spray Deflector features a tri-clamp connected vent housing with an interior reversed dish designed to reduce the amount of solution that exits a tank.
sanimatic.com
The Sani-Matic Hygienic Spray Deflector reduces solution from entering your vent filter and minimizes filter saturation.
Applications
The Hygienic Spray Deflector is designed for tanks where spray devices are used to clean the interior. These vessels include CIP tanks, process tanks, bioreactors and fermenters. It redirects sprayed solution back into the process tank, without inhibiting tank port cleaning. When following the recommended spray device operating requirements, the Hygienic Spray Deflector's design reduces solution from exiting open-to-atmosphere tanks – and reduces vent filter saturation and the potential for a burst rupture disk.
CIP Tanks
Process Tanks
Bioreactors
Fermenters
Tank Vent
Tank Vent with Deflector
Spray Device Port
Hygienic Spray Deflector with Reversed Dish
Tank Vent
Tank Vent Filter Housing
Tank Vent Filter Housing with Deflector
Vent Housing with Filter
Hygienic Spray Deflector with Reversed Dish
sanimatic.com
Model Number Key
Example Model #: HSD-TC15-E-1532EP
1
2
3
4
5
6
7
8
9
10 11 12 13 14
Component HSD Hygienic Spray Deflector Connection Type TC Tri-Clamp (Standard)
1-3
4, 5
Connection Size 15 1.5" (Standard) 20 2.0"
6, 7
Gasket Material E EPDM (Standard) V Viton P Platinum Cured Silicone T Teflon ID Finish 15 15 μin Ra (Standard) OD Finish 32 32 μin Ra (Standard) Polish EP Electropolish (Standard)
8
9, 10
11, 12
13, 14
Features
Achieving Optimum Results • Follow recommended spray device operating requirements. • Include vent filter heating jacket where applicable.
316L stainless steel construction Hygienic wetted finish: 15 µin Ra
Hygienic non-wetted finish: 32 µin Ra Face-to-face dimensions: 1.5" TC = 6.03" Face-to-face dimensions: 2.0" TC = 5.91"
Documentation
Document Name
Document Description
Bio-Pharm
MTR is a quality assurance document that certifies a material's chemical and physical properties and states the product made is compliant within the specific set of standards. It also states the identification number of the batch/lot of steel which the part/material was made from at the mill.
X
Material Test Report (MTR)
Component drawings for the assembly that document the dimensions and surface finish produced in manufacturing.
X
Component Drawings
Part of the As-Built drawing that states Sani-Matic has verified the assembly or part's surface finish meets the agreed upon requirements in the sales order.
X
Surface Finish Certification
A certified document that states that electropolishing was performed to the assembly or parts as agreed upon in the sales order.
Electropolish Certification (EP Cert)
X
A certified document that states that Citric Acid Passivation was performed to assemblies or parts as agreed upon in the sales order.
X
Passivation Certification
USP Class VI certifications are provided for any elastomer or thermoplastics used within the assembly of the component.
X
USP Class VI Certification
BPB-0007.1
Cleaning Confidence. Repeatable results you can count on every time you clean your process parts and equipment. That’s Cleaning Confidence from Sani-Matic.
sanimatic.com
Sani-Matic, Inc.
(p) 800-356-3300
(f) 608-222-5348
Page 1 Page 2 Page 3 Page 4Powered by FlippingBook