Model Number Key
Example Model #: HSD-TC15-E-1532EP
1
2
3
4
5
6
7
8
9
10 11 12 13 14
Component HSD Hygienic Spray Deflector Connection Type TC Tri-Clamp (Standard)
1-3
4, 5
Connection Size 15 1.5" (Standard) 20 2.0"
6, 7
Gasket Material E EPDM (Standard) V Viton P Platinum Cured Silicone T Teflon ID Finish 15 15 μin Ra (Standard) OD Finish 32 32 μin Ra (Standard) Polish EP Electropolish (Standard)
8
9, 10
11, 12
13, 14
Features
Achieving Optimum Results • Follow recommended spray device operating requirements. • Include vent filter heating jacket where applicable.
316L stainless steel construction Hygienic wetted finish: 15 µin Ra
Hygienic non-wetted finish: 32 µin Ra Face-to-face dimensions: 1.5" TC = 6.03" Face-to-face dimensions: 2.0" TC = 5.91"
Documentation
Document Name
Document Description
Bio-Pharm
MTR is a quality assurance document that certifies a material's chemical and physical properties and states the product made is compliant within the specific set of standards. It also states the identification number of the batch/lot of steel which the part/material was made from at the mill.
X
Material Test Report (MTR)
Component drawings for the assembly that document the dimensions and surface finish produced in manufacturing.
X
Component Drawings
Part of the As-Built drawing that states Sani-Matic has verified the assembly or part's surface finish meets the agreed upon requirements in the sales order.
X
Surface Finish Certification
A certified document that states that electropolishing was performed to the assembly or parts as agreed upon in the sales order.
Electropolish Certification (EP Cert)
X
A certified document that states that Citric Acid Passivation was performed to assemblies or parts as agreed upon in the sales order.
X
Passivation Certification
USP Class VI certifications are provided for any elastomer or thermoplastics used within the assembly of the component.
X
USP Class VI Certification
BPB-0007.1
Powered by FlippingBook