4. Cleaning System Pages a. Cleaning System Data – Overview
Note (2)
Note (3)
Notes 1. After selecting the system, the cleaning system overview page will show. There are several sections within the system page. 2. At the top of each section the system’s general information is shown, including (from left to right): a. System image – generalized graphical representation of the system b. System Display Name – the name assigned to the system (see Facility Page – System Alerts (Change System Display Name) for instructions for changing this)
c. System Name – the automated cleaning system’s product name d. Model Number – the automated cleaning system’s model number
e. SMI Number – the unique job number assigned to the automated cleaning system by Sani-Matic f. Status – the current status of the automated cleaning system. Status is one of the following states:
i. Running ii. Stopped iii. Disconnected 3. Sections that can be selected for the cleaning system include:
a. System Status ( default view ) – A quick overview of current key system data b. Cleaning Cycle Reports – Review, comment on, and approve all cleaning cycle data and reports from the system c. OEE ( Overall Equipment Effectiveness ) – Review OEE trends d. Preventive Maintenance – Review status of components with PM tracking
e. Data Trending – Review past analog data for the system (independent of cleaning cycles) f. Event Log – Review past event history for the system (independent of cleaning cycles) g. System Alerts – Review alert notification history for the system
DM-0009_SaniTrend® Cloud CR_IOM_Rev2.0 DRAFT
13 of 51
Powered by FlippingBook