d. Cleaning System Data – Cleaning Cycle Reports (Searching)
Note (2a – 2g)
Note (1)
Notes 1. To search/filter for specific cleaning cycles, select “Search” on the sidebar below the cleaning cycle cards.
2. The window is replaced with the search functions – once filtered with the selected value(s), select “Search” or cancel or reset filters. a. Start Date / End Date – a date and time based search filter to search for cleaning cycles ran within a particular timeframe
b. Quick Search – text based search for searching recipe name, comment text, or other filters. c. Recipe Number – search for all cleaning cycles executed with a particular recipe number
d. Cycle Status (All / Cycle Complete / Cycle Aborted) – filter for only completed or aborted cleaning cycles (or “All” for both) e. Cycle Status (All / Alarms / No Alarms) – filter for only cleaning cycles that contained alarms or did not have alarms (or “All” for both) f. Cycle Status (All / Approved / Not Approved / Disapproved) – filter for only cleaning cycles based on their approval status g. Runtime (minutes) – filter cleaning cycles by their total actual runtime in minutes. There are 2 selectable filters:
DM-0009_SaniTrend® Cloud CR_IOM_Rev2.0 DRAFT
18 of 51
Powered by FlippingBook