i. Cleaning System Data – Cleaning Cycle Reports (Reviewing Cycle Data)
Notes 1. The raw analog cycle data (along with what OpCode number was being run) throughout the cleaning cycle can be reviewed in this tab. This is useful for more in depth troubleshooting and diagnosing issues that occur during a cleaning cycle and seeing exact data values on a shorter (approximately every 6 seconds) timeframe. The following data is presented: a. Timestamp – date/time of the data capture b. OpCode Description – the OpCode name that was active during the capture time c. OpCode – the OpCode number that was active during the capture time d. Analog Values – analog values (actuals and set points (SP)) are shown in separate columns depending on what instrumentation is on the cleaning system 2. This data can also be exported to a table – in the lower right select “Export Trend Data” to download a .csv file of the tabled data.
DM-0009_SaniTrend® Cloud CR_IOM_Rev2.0 DRAFT
24 of 51
Powered by FlippingBook