n. Cleaning System Data – Preventive Maintenance Adjustment
Notes 1. To see the actual cycle count, setpoint value, or manage (reset) the PM counters, click on the applicable component. 2. The cycle count and setpoint values are shown. a. Select “Manage” to edit the setpoint or reset the counters. 3. The PM overview is shown with the following data/actions: a. Current Cycle Count – The current cycle count cannot be edited as this is data from the system. b. Current Setpoint – this can be edited if desired which will adjust the PM % value c. Reset PM Counters – clicking this button will take the current cycle count back to 0 and should be done if a PM is performed (e.g., valve seal change) on the component d. Cancel – cancels and exits. e. Apply – select if changing the current setpoint and wanting the value to update. Note (2) Note (3)
DM-0009_SaniTrend® Cloud CR_IOM_Rev2.0 DRAFT
29 of 51
Powered by FlippingBook