1. Overview
a. Introduction
The following is an operation manual for Sani-Matic’s SaniTrend® Cloud Cleaning Reports (CR) software product.
This manual focuses on user interface operation and screen navigation. Refer to specific system electrical and programming documents for more information on the wiring and programming of associated SaniTrend Cloud hardware and software elements.
This manual covers the SaniTrend Cloud CR Insights and CR Insights+ product tiers. SaniTrend Cloud Insights+ features are specifically outlined in section 6.
For the latest information on the SaniTrend Cloud CR products, please visit:
https://sanimatic.com/cleaning-reports/
b. Website Access
The SaniTrend Cloud online portal can be accessed at the following link:
https://sanimatic-prod1.cloud.thingworx.com/Thingworx/FormLogin/SaniTrend
Recommended browser and screen requirements are below:
Internet Browser - Chrome (preferred) Screen Size - 1920 x 1080 (preferred)
• •
c. Time Settings An important note on timestamp of data – the time shown while in the SaniTrend Cloud online portal is in the time local to the computer or device in which the data is being viewed. Typically review of your data is in the same time zone in which the system you are looking at is running, but this may not be the case if reviewing data from a remote location.
Actual event data is saved in UTC time which is translated into your local time per the above note.
When exporting any data to .csv files from any screen, the data that is exported and shown in the .csv file is UTC time.
DM-0009_SaniTrend® Cloud CR_IOM_Rev2.0 DRAFT
4 of 51
Powered by FlippingBook