System Insights - More Than Just Cleaning Reports
In addition to critical cleaning cycle reports, SaniTrend Cloud CR Insights and Insights+ tiers allow for insights into both system operation and performance and in how operators use the system; useful for maintenance, operators, quality, engineering and management.
Preventive Maintenance (PM) Tracking Proactively watch runtime hours on pumps, motors, and fans – and track cycle counts of valves or door locks – all with the end goal to taking a more proactive than reactive approach on maintenance. Be alerted via email or text when these runtime hours or cycle counts approach pre-set limits. Recipe Events & Steps Logging When did alarms occur during a cleaning cycle? Which alarms occurred, when, and how frequent are they? Did the operator stop the cleaning cycle or take excessively long to acknowledge an alarm? These, and more questions, can be answered about how your system runs and how the operators interact with it, with logged recipe events (alarms, messages, holds) and recipe step information. Overall Equipment Effectiveness (OEE) Trending Cleaning system OEE trends can be used to monitor performance of the system and user operation by evaluating the following parameters: • Availability. Answers the question “How often is my cleaning system being used (during planned cleaning time)?” to see impacts of alarms and operator stops. • Performance. Answers the question “Is anything slowing down my cleaning cycle speed?” to see cycle step holds (e.g., heating time or water fills) that could be optimized. • Quality. Answers the question “How often am I not completing a full cleaning cycle?” to investigate root causes of aborted cycles. • Overall OEE. An overall score to evaluate all OEE parameters together for a single cleaning system.
Availability
Performance
Quality
Caustic Pump
90.7%
Preventative Maintenance Required
LOW SUPPLY PRESSURE (ALARM)
ALARMS ACKNOWLEDGED (OPERATOR ACTION)
START BUTTON PRESSED (OPERATOR ACTION)
TEMPERATURE HOLD (MESSAGE)
PRE-RINSE - HEAT - ACTIVE RACK (OPCODE)
The SaniTrend Cloud CR Insights+ includes full HMI audit trail information, along with added PIN security for cleaning cycle commenting and approval, enabling 21 CFR Part 11 compliance. Full HMI Audit Trail for 21 CFR Part 11 Compliance
21 CFR Part 11
sanimatic.com
Powered by FlippingBook