Tunnel Washers are designed to reduce labor costs, minimize chemical use, and lower water and utility costs, while providing a complete clean.
HOW IT WORKS Three-section washers (detergent wash, recirculated rinse, and final rinse) are the most commonly requested designs. For heavy residues, a pre-rinse section may be required. The Blow-Off System can be added to remove some of the residual water left on after the final rinse. Operational overview of various Tunnel Washer configurations: Soiled product containers are conveyed through the Pre-Rinse (PR) section to loosen and remove heavy residues. The Detergent Wash (DW) section loosens and sprays off the remaining residue. The Recirculated Rinse (RR) removes most of the residual detergent solutions from the containers and overflows to Pre-Rinse, if available. PR DW RR
The Fresh Water Rinse (FR) removes the remaining detergent film and overflows to Recirculated Rinse (RR). This section can provide elevated temperature water for a final hot water sanitize step, or sanitizer chemical can be injected in line for a final chemical sanitize step. Optional Exit Blow-Off System (BL).
FR
BL
DW - Detergent Wash Key to Washer Sections:
Key to Washer Sections:
PR - Pre-Rinse Ext - Extended DW - Detergent Wash FR - Final Rinse RR - Recirculated Rins
Note: All washers are designed to conserve water.
FR - Final Rinse
RR - Recirculated Rinse
2-SECTION
3-SECTION (MOST COMMON)
Ex t
DW
FR
DW
RR
FR
DW
RR
FR
PR DW
DW
Ex t
DW
FR
DW
RR
FR
R
2-Section PR - Pre-Rinse Ext - Extended Length
Wash
3-Section with Extended Length 3-Section (most common)
3-Section (most common)
4-Sect 3-Section with Exten
2-Section
d Rinse
4-SECTION WITH OPTIONAL BLOW-OFF SYSTEM
4-SECTION
Ex t
RR
FR
PR
DW
RR FR
th Extended Length
4-Section
TUNNEL WASHERS
Powered by FlippingBook