QUICK TIPS Is there a way to monitor rotation?
Because the TANKO MX is geared and media-driven, it can be monitored with sensors for proof of rotation. The AWH CIPGuard (TCG-ZR) is available for monitoring proof of rotation. Strainer Sizing Use the below recommendations for sizing a strainer to use upstream of rotary and jet spray devices. Wedgewire Element: 0.007" or smaller Mesh Overlay: 80 mesh or higher Filter Tube: 180 micron or smaller GOOD TO KNOW · Vertical positioning is recommended to avoid reduced service life. · Fully drainable in a vertical or horizontal position. · The MX150-G12 is an available option within the TANKO MX Series. It has two nozzles and is used in applications which might have a relatively small insertion port but require a longer spray throw distance. (This item is not featured in the catalog but is available through Sani-Matic Representatives.) · Cleaning cycle times are dependent on operating pressure - the higher the pressure, the higher the RPM, and the shorter the overall cleaning cycle. · Surface finish of materials of construction are 32 µin Ra, however some surfaces may not be measurable or accessible due to the design.
TANKO MX Jet Spray Device
Max. Cleaning Radius (ft)
Connection Style
Flow (gpm)
Pressure (psi)
Model
Spray Pattern
Spray Nozzle Connection Size
Part #
360 ° Full Coverage Nozzle Spray 360 ° Full Coverage Nozzle Spray 360 ° Full Coverage Nozzle Spray 360 ° Full Coverage Nozzle Spray
TANKO MX125 TANKO MX125
Four (4) 5.0 MM Nozzles
1.00"
FNPT 25 - 29 58 - 116
11.5
053597
Four (4) 6.0 MM Nozzles
1.00"
FNPT
32 - 41
58 - 116
13.0
053598
TANKO MX150-G14 TANKO MX150-G14
Four (4) 7.0 MM Nozzles
1.50"
FNPT 51 - 68 58 - 116 22.5
053600
Four (4) 8.0 MM Nozzles
1.50"
FNPT 56 - 81
58 - 116 24.0
053599
NOTE: Green highlighted cells indicate stocked items.
TANKO MX125 Dimensional Information
TANKO MX150-G14 Dimensional Information
103
HCS-0001.7
Powered by FlippingBook