QUICK TIPS Can I order just the sight glass?
Yes - the VL-3A sight glass is a cost effective solution for high operating temperatures and pressures that can be used for any sanitary process sight glass need.
Can I use this as a combination sight glass and light? The 4.0" TC model's light is offset from center, and has enough visible sight glass space for using as a combination sight glass and light. Smaller sizes are intended for process lighting only and a secondary source for viewing (e.g., manway, additional sight glass) is required. Is this unit 3-A authorized?
The VL-3A model sight glass used in the VessaLite ® assembly is authorized to carry a 3-A symbol, which is the only process contact part of the assembly.
Can I use the light with another or existing sight glass? Yes - if using with an existing sight glass, the dimensions of the sight glass opening, process connection, and height of sight glass will need to be supplied to make sure the light tri-clamp bracket will work. GOOD TO KNOW · Maximum Operating Conditions (Sight Glass / Process Slide):
Connection Size
Maximum Operating Conditions
250 psi @ 250 ° F 200 psi @ 250 ° F 150 psi @ 250 ° F 125 psi @ 250 ° F
2.0" TC
2.5" TC
3.0" TC
4.0" TC
· Sight Glass Materials of Construction: Borosilicate Lens / EPDM Gaskets · Operating Temperature (Light / Non-Process Slide): 4 ° F - 212 ° F · Environmental Rating: IP69k · Light Material of Construction: Borosilicate Lens / 316ss Housing / Silicone Mounting Gasket (FDA Approved) · Light Characteristics: 200 Lumens, 5000K Daylight White · Light Electrical Specifications: UL Approved, 400 mA Max Current Draw, 4 Pin M12 Connection · Light Useful Life: Output will decrease less than 30% after 36,000 hours · Wiring Diagram:
126
sanimatic.com
Powered by FlippingBook