Gooseneck Vents
These vents are used on process tanks for air venting. Construction of the vent is of 316L stainless steel fittings with all interior and exterior welds ground & polished. The outlet connection is butt-weld and can be welded to if downtubes or other process piping is desired to be added to the open vent outlet.
Tank Connection Part #
Description
Finish
1.5" TC
323518
2.0" TC
323519
2.5" TC
323520
32 Ra
Gooseneck Vent
3.0" TC
323521
4.0" TC
323522
6.0" TC
323523
NOTE: Tank vent sizing is the responsibility of the installing user. NOTE: See High Purity page 169 for 20 Ra Gooseneck Vents.
2
1
TUBE OD A
B
1.5" 2.0" 2.5" 3.0" 4.0"
4.5" 6.0" 7.5" 9.0"
6.0" 7.0" 8.0"
Dimensional Information
10.0" 12.0" 18.0"
12.0" 18.0"
"B" 6.0"
Tank Connection
"A"
B
B
1.5" TC
4.5"
6.0"
CUSTOMER APPROVAL
APPROVED APPROVED W/ REVISIONS NOT APPROVED
2.0" TC
6.0"
7.0"
B B
2.5" TC
7.5"
8.0"
NAME DATE
TUBE OD Tube OD
3.0" TC
9.0"
10"
4.0" TC
12"
12"
FINISH:
POLISH ID 32 RA POLISH OD 32 RA, SATIN POLISH OD 32 RA, SATIN
6.0" TC
18"
18"
A A
PL - POLISH ID 20 RA
ITEM NO.
A
A
PART NO.
DESCRIPTION CS596-E2WCU-6L 180 DEGREE U-BEND CLAMP X WELD T316 3A
1
20SEP22 ADDED -PL FINISH
PROPRIETARY AND CONFIDENTIAL
SIZE
MATERIAL:
REV
DATE: TOLERANCES UNLESS OTHERWISE SPECIFIED: ECO# MACHINED: FRACTIONAL 1/32 ANGULER: WELDED ASSEMBLIES: 1-12" 12-60"
REV.
DESCRIPTION
316L SS
1
WRITTEN PERMISSION OF VNE CORPORATION IN PART OR AS A WHOLE WITHOUT THE VNE CORPORATION. ANY REPRODUCTION DRAWING IS THE SOLE PROPERTY OF THE INFORMATION CONTAINED IN THIS
A
DRAWN: TAG DATE:
CUSTOMER:
1
.X
.005 .015 .XX .010 .XXX
SANIMATIC
14SEP22
.093 60"+
.030
.062
IS PROHIBITED.
2
1
Sample Valve
Process sample valves allow for taking manual samples of small volumes of fluid from your process for quality verification. These can be used on tanks or on process lines.
Description Process Connection Sample Connection Part #
0.50" TC / 0.75" TC
0.50" TC
021881
Sample Valve, 316Lss, Teflon Seat/ Viton Elastomers
1.0" TC / 1.5" TC
0.50" TC
058150
2.0" TC
0.50" TC
058151
NOTE: Maximum temperature of 180 ° F, maximum pressure of 100 psig.
0.50" TC / 0.75" TC Sample Valve
129
HCS-0001.7
Powered by FlippingBook