Gooseneck Vents
These vents are used on process tanks for air venting. Construction of the vent is of 316L stainless steel fittings with all interior and exterior welds ground & polished. The outlet connection is butt-weld and can be welded to if downtubes or other process piping is desired to be added to the open vent outlet.
Tank Connection Part #
Description
Finish
1.5" TC
323518
2.0" TC
323519
2.5" TC
323520
32 Ra
Gooseneck Vent
3.0" TC
323521
4.0" TC
323522
6.0" TC
323523
NOTE: Tank vent sizing is the responsibility of the installing user. NOTE: See High Purity page 175 for 20 Ra Gooseneck Vents.
2
1
TUBE OD A
B
1.5" 2.0" 2.5" 3.0" 4.0"
4.5" 6.0" 7.5" 9.0"
6.0" 7.0" 8.0"
Dimensional Information
10.0" 12.0" 18.0"
12.0" 18.0"
"B" 6.0"
Tank Connection
"A"
B
B
1.5" TC
4.5"
6.0"
CUSTOMER APPROVAL
APPROVED APPROVED W/ REVISIONS NOT APPROVED
2.0" TC
6.0"
7.0"
B B
2.5" TC
7.5"
8.0"
NAME DATE
TUBE OD Tube OD
3.0" TC
9.0"
10"
4.0" TC
12"
12"
FINISH:
POLISH ID 32 RA POLISH OD 32 RA, SATIN POLISH OD 32 RA, SATIN
6.0" TC
18"
18"
A A
PL - POLISH ID 20 RA
ITEM NO.
A
A
Sample Valves
PART NO.
DESCRIPTION CS596-E2WCU-6L 180 DEGREE U-BEND CLAMP X WELD T316 3A
1
20SEP22 ADDED -PL FINISH
PROPRIETARY AND CONFIDENTIAL
SIZE
MATERIAL:
REV
DATE: TOLERANCES UNLESS OTHERWISE SPECIFIED: ECO#
REV.
DESCRIPTION
316L SS
1
Process sample valves allow for taking manual samples of small volumes of fluid from your process for quality verification. These can be used on tanks or on process lines. 1 IS PROHIBITED. WRITTEN PERMISSION OF VNE CORPORATION IN PART OR AS A WHOLE WITHOUT THE .062 VNE CORPORATION. ANY REPRODUCTION .X DRAWING IS THE SOLE PROPERTY OF THE INFORMATION CONTAINED IN THIS .093 .030 .005 .015 .XX .010 .XXX MACHINED: FRACTIONAL 1/32 ANGULER: WELDED ASSEMBLIES: 1-12" 12-60" 60"+
A
DRAWN: TAG DATE:
CUSTOMER:
SANIMATIC
14SEP22
2
1
Description Process Connection Sample Connection Part #
0.50" TC / 0.75" TC
0.50" TC
060887
1.0" TC / 1.5" TC
Sample Valve
0.50" TC
060888
2.0" TC
0.50" TC
060889
0.50" TC / 0.75" TC Sample Valve
GOOD TO KNOW · Wetted Materials: 316Lss, PTFE Seat, Viton Elastomers · ID Finish: 15 μin Ra EP · Max Pressure Rating: 125 psi · Max Temperature Rating: 248 °F · Certifications: 3-A Authorized
135
HCS-0001.8
Powered by FlippingBook