QUICK TIPS Did you know Tanker Spray Washers do not need to be 3-A authorized? There is not a 3-A standard for tank cleaning devices that are removed. The only 3-A standard for tank cleaning is standard number 78-03 for Spray Cleaning Devices Intended to Remain in Place. 3-A standard number 05-15 for Automotive Transportation Tanks for Bulk Delivery and Farm Pick-Up Service, allows for these tanks to be cleaned by impingement or flowing cleaning solutions over the surface, but gives no other stipulation. GOOD TO KNOW Model TS-4
Model TS-5 The S-shaped manifold doubles the spray volume to the ends of the tanker. Combined with the rotary spray device, it creates 360 ° spray coverage allowing direct impingement of the cleaning solution to the entire tank. High-pressure nozzles provide the reach needed to clean long tankers.
The TS-4 features a center spray ball for a top spray pattern and two multi-bore jet nozzles for tank end washing. The vented manway cover has a bail handle and two hold downs with gasket.
• Material Test Reports (MTR’s) are not available for TS-4 and TS-5 spray assemblies. • The cycle time (time requiring full pattern of spray) for the TS-5 is approximately 24 minutes at the 60 psi operating pressure.
TS-4 Spray Pattern
TS-5 Spray Pattern
140
sanimatic.com
Powered by FlippingBook