QUICK TIPS Did you know Tanker Spray Washers do not need to be 3-A authorized? There is not a 3-A standard for tank cleaning devices that are removed. The only 3-A standard for tank cleaning is standard number 78-03 for Spray Cleaning Devices Intended to Remain in Place. 3-A standard number 05-15 for Automotive Transportation Tanks for Bulk Delivery and Farm Pick-Up Service, allows for these tanks to be cleaned by impingement or flowing cleaning solutions over the surface, but gives no other stipulation. GOOD TO KNOW Model TS-4
Model TS-5 The S-shaped manifold doubles the spray volume to the ends of the tanker. Combined with the rotary spray device, it creates 360 ° spray coverage allowing direct impingement of the cleaning solution to the entire tank. High-pressure nozzles provide the reach needed to clean long tankers.
The TS-4 features a center spray ball for a top spray pattern and two multi-bore jet nozzles for tank end washing. The vented manway cover has a bail handle and two hold downs with gasket.
• Material Test Reports (MTRs) are not available for TS-4 and TS-5 spray assemblies. • The cycle time (time requiring full pattern of spray) for the TS-5 is approximately 12 minutes at the 60 psi operating pressure. Cycle time varies based on operating pressure and the time required to clean will vary depending on the product within the tank.
TS-4 Spray Pattern
TS-5 Spray Pattern
146
sanimatic.com
Powered by FlippingBook