Component Documentation Packages (CDP)
Sani-Matic can provide complete component documentation packages to meet your specification and validation requirements. All documentation packages are provided electronically. Hard copy documentation packages are available at an additional cost.
Component Documentation Packages (CDP)
CDP - Basic
CDP - Standard
CDP - Premium
Document Name
Document Description
A MTR is a quality assurance document that certifies a material's chemical and physical properties and states the product made is compliant within the specific set standards. It also states the identification number of the batch/lot of steel, which the part/material was made from at the mill. A 3-A certificate authorization for the supplied product (if applicable to the component). A document that specifies order information, associated heat numbers (as applicable), along with certificate of conformance (CoC) to Sani-Matic practices. Certified drawing(s) that documents the as-built conditions of the component produced in manufacturing. A certified document that contains details of an assembly where each of the material's heat numbers are recorded. A heat map can stand by itself or be combined with a weld map and slope map. A certified document that contains details of a piping assembly where each weld is identified with a unique number. The identifying number is used on the weld log which profiles each weld. A certified document that records all welds contained in a weld map. The profile of each weld recorded includes heat numbers of the material, the detail where the weld is located, the welder’s I.D., the date of the weld, the machine used to weld, and the Quality Inspector’s approval sign-off. Part of the as-built drawing that states Sani-Matic has verified the assembly or that the parts’ surface finish meets the agreed upon requirements in the sales order. A certified document that states that electropolishing was performed to the assembly or parts as agreed upon in the sales order. A certified document that states that citric acid passivation was performed to assemblies or parts as agreed upon in the sales order.
ü ü ü
Material Test Report (MTR)
ü ü ü ü ü ü
3-A Certificate
Sani-Matic Certificate of Conformance (CoC)
ü ü
-
Certified "As-Built" Drawings
ü ü
-
Heat Map
ü ü
-
Weld Map
ü ü
-
Weld Log
ü ü
-
Surface Finish Certification
ü
Electropolish Certification (EP Cert)
-
-
Passivation Certification ü NOTE: Indicate at time of order the need for any documentation packages. Documentation may not be available after product is delivered and may incur additional charges. - -
150
sanimatic.com
Powered by FlippingBook