Multi-Angle-Line Strainer Replacement Parts Dual Vertical Angle-Line/ALB Strainer Stands
Connection Size
Body Size
SHORT (20 3 / 4 ")
LONG (36")
1.5"
4"
254212
257979
2.0"
4"
258021
258010
2.5"
4"
258030
258017
3.0"
4"
258031
257599
4.0"
4"
N/A
254256
NOTE: Stands are approximately 35 lbs.
Valve Kits Kit includes: Four (4) Elbows, two (2) Tees, four (4) Butterfly Valves (Manual or Pneumatic), twelve (12) Clamps, and twelve (12) Gaskets. Material: 316Lss NOTE: Alternate valves available. NOTE: Strainers are not included in the valve kit, they are sold separately. NOTE: Pneumatic Valves have the following requirements: · 1/8" NPT air fitting ports · 80 to 100 psi Air Supply Pressure (120 psi Maximum Pressure Rating) -4 ° F to 250 ° F Operating Temperature
Connection Size
Manual Valve Kit Part #
Pneumatic Valve Kit Part #
1.5"
291142
324869
2.0"
291143
324870
2.5"
291144
324871
3.0"
291145
324872
4.0"
291146
324873
Pressure Kits Kit includes: Two (2) Pressure Gauges or Transmitters, two (2) Tees, four (4) Gaskets, and four (4) Clamps.
Pressure Transmitter Kit Part #
Connection Size
Pressure Gauge Kit Part #
1.5"
158581
324874
2.0"
158585
324875
2.5"
158591
324876
3.0"
158593
324877
4.0"
158596
324878
NOTE: Install before and after the strainer assembly. NOTE: Strainers are not included in the sensor kit, they are sold separately. NOTE: All Pressure Gauge and Pressure Transmitter options use 1.5" Tri-Clamp connections. NOTE: Pressure Gauges are Sanitary Diaphragm-type with a 0 to 160 psi range. NOTE: Pressure Transmitters require a 24V DC power source and output a 4-20mA signal.
Pressure Gauge
Pressure Transmitter
32
sanimatic.com
Powered by FlippingBook