0.060" slot size
0.040" slot size
0.060" slot size
0.030" slot size
NOTE: Image is a demonstration piece highlighting the largest to smallest wedgewire slot sizes.
0.020" slot size
0.015" slot size
0.010" slot size
0.002" slot size
0.005" slot size
0.002" slot size
1 / 8 " Perforated Strainer Element
1 / 4 " Perforated Strainer Element
GOOD TO KNOW • Element Material: 316Lss • Element Sanitary ID Finish: 32 µin Ra • Wedgewire elements have some interior surfaces greater than 32 µin Ra due to the construction process. • End-Inlet Strainers are Standard Flow and Side-Inlet Strainers are Reverse Flow. • Perforated and wedgewire elements provide different straining advantages: Advantages of Perforated Elements • Authorized to carry a 3-A symbol when used without mesh overlay • Large open area ratio with lower pressure drops • Can capture fine particulate with wire mesh overlay and filter tubes Advantages of Wedgewire Elements • Simple one piece solution (vs. using mesh overlays or filter tubes with perforated elements) • Ability to handle higher differential pressures across strainer element
35
HCS-0001.7
Powered by FlippingBook