Differential Pressure Kits These kits are used to monitor absolute pressure before and after a strainer. The differential pressure can be found by measuring the difference between these two pressure readings. These kits include two (2) pressure gauge or transmitter tee assemblies to be installed on the strainer inlet connection and the strainer outlet connection. The kit includes two (2) Pressure Gauges or Transmitters, two (2) Tees, four (4) TC Gaskets, and four (4) TC Clamps. Connection Size Pressure Gauge Kit Part # Pressure Transmitter Kit Part # 1.5" 158581 324874 2.0" 158585 324875 2.5" 158591 324876 3.0" 158593 324877 4.0" 158596 324878 NOTE: Install before and after the strainer assembly. NOTE: Strainers are not included in the sensor kit; they are sold separately. NOTE: All Pressure Gauge and Pressure Transmitter options use 1.5" Tri-Clamp connections. NOTE: Pressure Gauges are Sanitary Diaphragm-type with a 0 to 160 psi range. NOTE: Pressure Transmitters require a 24V DC power source and output a 4-20mA signal. Pressure Transmitter Pressure Gauge
Tri-Clamp (TC) Caps TC Caps can be used on Drain / Sample Port to cap the port.
Description
Part #
TC Cap, 0.50" / 0.75", 316Lss
020529
ID Tag Custom tag your components with an engraved stainless steel tag, affixed to the component using ball chain. Up to 10 characters can be specified.
Description
Part #
ID Tag, 2.0" x 0.5", 304ss
720826
Services (Angle-Line Strainers) The following services can be added to an angle-line strainer order.
Description
Part #
Passivation, Angle-Line Strainer
PASSIVATION-ANGLE-LINE STRAINER PASSIVATION-HIGH-CAPACITY- ANGLE-LINE STRAINER
Passivation, High-Capacity Angle-Line Strainer
NOTE: Passivation is only available for a full strainer assembly.
42
sanimatic.com
Powered by FlippingBook