TANKO ® RF The TANKO ® RF is a mini retractor with a rotatry spray head that is extended during the cleaning process with the help of the cleaning solution pressure and driven with the help of the spray head. After cleaning solution stops flowing, the spray head retracts into its housing by spring force and closes tightly with the help of the O-ring. Applications for the TANKO RF include the insides of larger diameter piping, spray dryers, ducting, or small containers where built-in components are not permitted. The TANKO RF is available in two sizes - RF40 and RF50.
340°
QUICK TIPS What orientation can I mount the TANKO RF in? The unit operates best when installed vertically, but can be used in other positions with some limited service life of wear parts. Strainer Sizing Use the below recommendations for sizing a strainer to use upstream of rotary and jet spray devices. Wedgewire Element: 0.007" or smaller
Mesh Overlay: 80 mesh or higher Filter Tube: 180 micron or smaller GOOD TO KNOW
• Materials: 316Lss / 316ss / PEEK / EPDM • Maximum Working Temperature: 203 °F • The TANKO RF is clamped onto a special weld x tri-clamp ferrule that is welded onto the process line / tank that needs to be cleaned. • Two (2) tri-clamps & gaskets are required (not included) to connect the TANKO RF to the supply process tubing and the weld ferrule.
96
sanimatic.com
Powered by FlippingBook