Table 9: Electric Heater Data
Chamber Model
Electric Heater Size (kW)
P335 P365 P565
9
18
22
NOTE: • Maximum maintenance temperature is 140 °F for the P335 model and 160 °F for the P365 and P565 models based on ambient (68 °F) room temperature • Typical temperature drop of incoming water is 20 °F due to required heating of cabinet, rack and parts The electric heater will take approximately 5 minutes per cleaning cycle step to recuperate this initial heat loss
The No Recirculated Heating option removes the direct steam injection assembly from the standard system The recirculation system temperature transmitter is also removed No cleaning cycle temperature control or monitoring capabilities are included in the system with this option 10.4 Pump Type These options replace the standard Ampco recirculation pump with a different manufacturer • Waukesha • Fristam • Alfa Laval 10.5 Motor Type These options replace the recirculation pump’s standard TEFC motor with an upgraded rating • Washdown Duty • Stainless Steel Washdown 10.6 Supply Pressure Monitoring The Pressure Transmitter option replaces the pressure gauge in the recirculation system with a diaphragm type pressure transmitter with local indication The pressure transmitter has a 0-100 psi range and 4-20 mA output This option adds system monitoring and alarming capabilities for the recirculation system pressure 10.7 Supply Flow Monitoring The Flow Switch option adds an insertion probe style flow switch to the recirculation system The flow switch has a discrete output This option adds system monitoring and alarming capabilities for the recirculation system flow, based on the discrete output The Flow Meter option adds a magnetic flow meter with local indication to the recirculation system The flow meter has a 0-300 gpm range on the P335 model, 0-800 gpm on the P365 and P565 models, and 4-20 mA output This option adds system monitoring and alarming capabilities for the recirculation system flow
sanimatic.com 17
TD-0003.5
Powered by FlippingBook