11.2 Transfer Carts Transfer carts hold and transfer racks into and out of the chamber, as well as transport the racks between the SaniCab P
and process equipment in other areas of the facility Three (3) transfer cart sizes are available for use with the SaniCab P cabinet washer:
• Transfer Cart – P335 • Transfer Cart – P365 • Transfer Cart – P565
Each transfer cart is designed to hold one (1) rack of the same size (eg, one (1) Transfer Cart – P335 will hold one (1) P335 rack)
Transfer Cart - P335
Table 14: Transfer Cart Data
Cart Dimensions
Transfer Cart Name
Loading Rail Height (in)
W"
D"
H"
Transfer Cart - P335 32 56 44 Transfer Cart - P365 32 94 44
17 17 17
Transfer Cart - P565
Transfer Cart - P565 41
94 44
The transfer carts are manufactured of open frame, 304ss angle, and solid bar with a bead blast finish Carts are supported by two (2) straight and two (2) locking swivel casters of solid polyurethane material The carts have safety locking features to secure the rack on the transfer cart during transport and lock the cart into the SaniCab P during rack loading and unloading
12. Accessories
12.1 Racks The Racks category of accessories contains information on rack passivation and part modeling services
All custom rack development requires 3D part models of all parts Two (2) different 3D modeling service options are provided in this section for developing process part 3D models The detailed design of the custom racks and finalized pricing occurs after end-user part loading constraints are established and all process parts are 3D modeled The cost difference between the budgetary value and finalized custom design, if applicable, is adjusted during the project 12.1.1 Passivation - Rack Sani-Matic will provide passivation of all surfaces of the selected rack A certificate of passivation is provided upon completion
sanimatic.com 29
TD-0003.5
Powered by FlippingBook