Key Technical Data
Documentation Package
• Temperature & Pressure Rating: 200 psi @ 70 °F / 125 psi @ 200 °F • Weight: 21-25 lbs (dependent on options chosen) • Max Pressure Drop Rating (Across Strainer Element): 40 psi • Wetted Materials - Strainer Body and Element: 316Lss - Element Retainer O-ring: Teflon TM Encapsulated Silicone - Element End Cap O-ring: EPDM - Tri-Clamp Gaskets: Tuf-Flex ® PTFE/EPDM - Sight Glass Seals: FKM - Mesh Underlays (Optional) : 316Lss - Relief / Sample Valve (Optional): Teflon Seat / Viton Elastomers • Differential Pressure Connections (Optional): 2.0” TC • Relief / Sample Valve (Optional): Welded to strainer element cap with 10mm hose barb connection outlet
• MTRs • Surface Finish Certification • UPS Class VI Certifications • Electropolish Certification • Passivation Certification • Weld & Heat Map • Weld Log • As-Built Drawings • Hydrostatic Test (Optional)
Strainer Element Assembly
Dimensional Information
Inlet/Outlet Size
Available Configurations
Body Dia.
A
B
C
D
1.5" TC x 1.5" TC
4" 4" 4" 4"
20 3 / 4 " 20 1 / 2 " 20 1 / 4 "
4 1 / 8 "
24 7 / 16 " 24 7 / 16 " 24 7 / 16 " 24 7 / 16 "
1 1 / 4 "
LH, RH
2.0" TC x 2.0" TC 2.5" TC x 2.5" TC 3.0" TC x 3.0" TC
4 3 / 8 " 4 3 / 8 " 4 3 / 8 "
1"
LH, RH, LB, RB LH, RH, LB, RB LH, RH, LB, RB
3 / 4 "
20"
1 / 2 "
NOTE: Lead times for LH and RB configurations are longer than RH and LB configurations.
NOTE: The strainer is drainable in the horizontal position, which requires draining both out the inlet and outlet. For vertical or angled installation, the strainer is drainable out of the outlet when installed between 45 ° and 90 ° from horizontal.
(p sanimatic.com (f)
Sani-Matic, Inc.
(p (p) 800-356-3300
(f)
TD-0007.1.1
Powered by FlippingBook