Spate cleaner TANKO-SF
The manufacturer accepts NO liability for damage arising from this. The operating company is solely responsible for the risk. The device must not be put into operation until it has been assured that all the safety devices are fully functional and the plant in which the device is installed meets the safety requirements of all relevant European directives (e.g. the Machinery Directive).
2.2 Spare Parts, Replacement Parts and Accessories
CAUTION
Risk of damage, malfunction or complete failure of the device! Incorrect or faulty spare/replacement parts and accessories put the functional safety and reliability of the device at risk. There is a risk of minor or moderate bodily injury. The failure of components or a device malfunction can cause material damage and consequential damages
Use only the manufacturer's original spare parts.
NOTE
Loss of the hygienic Standard! The use of NON-approved spare parts, replacement parts and accessory parts impairs the required hygienic standard of the device. Microbial contamination of the manufacturing product could be the consequence.
Use only the manufacturer's original spare parts.
Use only FDA conform spare parts when replacing standard parts.
We expressly draw attention to the fact that replacement parts and accessories NOT supplied by AWH have NOT been checked or approved by AWH. The installation and/or the use of such products could therefore under certain circumstances result in changes with negative results to the properties of the device specified by its design and the higher-level plant. AWH is not liable for any damage arising from the use of non-original parts or non-original accessory parts. Standard parts can be obtained from specialist dealers.
Section 7.5 Spare Parts and Customer Service includes a list of spare parts.
2.3 Duties of the Operating Company
The device is used in the commercial sector. The operating company is thus subject to the legal obligations of occupational safety. In the EEA (European Economic Area), the national implementation of the Framework Directive 89/391/EEC on carrying out measures for improving safety and protecting the health of employees during work, as well as the associated individual directives shall be observed and complied with in their current valid versions.
8/63
Translation of the original Operating / Installation Instructions 2016/09 Rev.1
2 Safety
Powered by FlippingBook