Spate cleaner TANKO-SF
8.2 Faults and Remedial Action
Fault
Cause
Remedy
Effectiveness of the cleaning process is inadequate
Pressure for the cleaning fluid is insufficient or no cleaning fluid pressure.
Check the pressure of the cleaning agent
Check the filter and clean it if necessary
Check the outlet opening on the device and clean it if necessary Check the pressure of the cleaning agent and reduce pressure if necessary
Pressure of the cleaning agent too high, cleaning agent turns into mist
Spray head does not rotate
Holes blocked
Clean holes
Holes deformed
Replace the device
Sliding surfaces soiled
Clean the device
Device is worn
Replace the device
Table 8.2-1: Operating Faults – Cause and Remedy
If the specified measures are NOT successful, please contact AWH.
In the event of return shipment (e.g. repair / servicing / return), a hazardous substance declaration must be enclosed with the device in accordance with the Hazardous Substance Directive (GefStoffV). Request the form for the hazardous substance declaration from AWH.
8 Faults
Translation of the original Operating / Installation Instructions 2016/09 Rev.1 51/63
Powered by FlippingBook