Jet Cleaner TANKO-JM
The manufacturer accepts NO liability for damage arising from this. The operating company is solely responsible for the risk. The device must not be put into operation until it has been assured that all the safety devices are fully functional and the plant in which the device is installed meets the safety requirements of all relevant European directives (e.g. the Machinery Directive).
2.2 Spare Parts, Replacement Parts and Accessories
WARNING
Risk of damage, malfunction or complete failure of the device! Incorrect or faulty spare/replacement parts and accessories put the functional safety and reliability of the device at risk. There is a risk of death or severe physical injuries. The failure of components or a device malfunction can cause material damage and consequential damages. Only use the manufacturer's original spare parts. We expressly draw attention to the fact that replacement parts and accessories NOT supplied by AWH have NOT been checked or approved by AWH. The installation and/or the use of such products could therefore under certain circumstances result in changes with negative results to the properties of the device specified by its design and the higher-level plant. AWH is not liable for any damage arising from the use of non-original parts or non-original accessory parts. Standard parts can be obtained from specialist dealers.
Section 7.5 Spare Parts and Customer Service includes a list of spare parts.
2.3 Duties of the Operating Company
The device is used in the commercial sector. The operating company is thus subject to the legal obligations of occupational safety. In the EEA (European Economic Area), the national implementation of the Framework Directive 89/391/EEC on carrying out measures for improving safety and protecting the health of employees during work, as well as the associated individual directives shall be observed and complied with in their current valid versions. Of particular importance in this connection is Directive 2009/104/EC on the minimum specifications for safety and health protection of employees using work equipment in their work.
As a basic rule, in Germany the Industrial Safety Regulation (BetrSichV) must be observed.
In other countries, the respective national directives, statutes and country-specific regulations regarding occupational safety and accident prevention are to be complied with.
At the same time, the following, non-exhaustive instructions apply in particular:
– The operating company must ensure that the device is used only as intended (see section 2.1 Intended Use ). – The operating company must keep informed of the locally applicable occupational health and safety regulations and, in addition, use a risk assessment to determine the hazards resulting from the
8/90
Translation of the original Operating / Installation Instructions 2016/12
2 Safety
Powered by FlippingBook