ATEX Spate Cleaner TANKO-EX-S and ATEX Spray Cleaner TANKO-EX-RB
WARNING
Danger resulting from negative pressure/vacuum in the container! A cold cleaning process in hot enclosed containers can generate negative pressure,
which may lead to damage to the container. There is a risk of death or severe physical injury.
Take precautions to allow gases or vapors to escape during operation (e.g. install devices for ventilation or pressure equalization).
As a result of the variety of practical applications and uses for the cleaning device, AWH CANNOT specify a noise level for the device under load, i.e. when installed in the container and operating with cleaning agent. For this reason that the manufacturer can offer the operating company, solely as a precautionary measure, a few points of reference and some notes to be observed and to be integrated into the operating company's hazard assessments.
CAUTION
Risk of hearing damage as a result of an increased noise level! The device emits a noise pressure level of L pA < 70 dB(A).
When the device is operated in a container, the noise level may exceed the maximum permitted exposure value of L EX,8h = 85 dB(A) and varies depending on the properties of the container in the plant and the existing operating conditions of the device. Hearing damage could be incurred as a result. The plant noise level must always be measured and documented by the operating company.
Keep the plant noise level within the legal range:
– Carry out noise reduction measures (e.g. sound insulation).
– Place barriers around the noise area and mark it accordingly (e.g. with mandatory sign “ Use hearing protection ” ).
– Use effective hearing protection!
Comply with the technical health and safety rules relating to noise and vibration (TRLV Lärm in Germany). State-of-the-art technology must be used to implement the measures to provide protection from exposure to noise based on the risk assessment. In this case, noise emissions must be prevented at source, or reduced as far as possible.
42/79
Translation-Operating/Installation Instructions 2017/10
6 Commissioning
Powered by FlippingBook