TANKO® S & TANKO® RB_IOM_Rev0

ATEX Spate Cleaner TANKO-EX-S and ATEX Spray Cleaner TANKO-EX-RB

WARNING

Risk of burns from hot surfaces! The device may heat up significantly as a result of the cleaning agent or the heat transfer from the container. Contact with the device can cause burns on the skin. There is a risk of death or severe physical injury.

 Comply with the warning signs and DO NOT touch the indicated areas.

 Do NOT remove insulation from protected hot surfaces.

 Maintain safety clearance of existing protective equipment or barriers.

 Use personal protective equipment (e.g. protective gloves; cloth) against hot surfaces.

 Do not touch the device until after a sufficient cooling time.

When operating the device, adhere to the following additional instructions:

WARNING Persons in the container. Persons may be struck by the jets from the cleaning head!

There is a risk of death or severe physical injury.

 Do NOT start cleaning operation while there are persons in the container.

 NEVER direct the cleaning jet or torrent at persons.

WARNING Incorrect operation of the device!

There is a risk of death or severe physical injury.

 Only operate the device when it is in perfect condition.

 Do not operate the device unless it is installed inside an enclosed container.

 Drain and depressurize the container that needs to be cleaned.

 Securely close all of the openings on the container (e.g. inspection openings).

 Comply with the switch-on and switch-off procedures when operating the device

(see sections 6.3 Switch-on procedure and 7.2 Switch-off Procedure ).

 There is no need for the device to be run in.

 The following operating states of the device are NOT permitted:

– Operation of the device without cleaning agent.

– Immersing the device in the product of the production process.

– Operation of the device outside the permitted parameters (see section 3.3 Technical Data ).

– Operating the device with air or gas

 Immediately stop operation in the event of leaks outside the container.

 Refrain from any type of work which compromises the safe and reliable function of the device.

 Immediately inform the operating company of any changes to the device or the plant that may impair its safety.

47/79

6 Commissioning

Translation-Operating/Installation Instructions 2017/10