ATEX Spate Cleaner TANKO-EX-S and ATEX Spray Cleaner TANKO-EX-RB
NOTE
Formation of hydrochloric acid when cleaning the device! No dry adhesions or deposits of cleaning agent should be left behind in the device. This could cause the cleaning agent to salt out or form crusts. If the cleaning agent contains volatile solvents containing chloride, then hydrochloric acid could arise when rinsing with clear water. The functional safety and reliability of the device may be compromised. DO NOT rinse with clear water if the cleaning agent includes volatile solvents containing chloride.
The following must be observed when blowing out the device with air:
– fix the head in place in such a way that it cannot rotate while being blown out
– use filtered, oil-free compressed air
– Time of the dry-blowing 5 – 10 min (longer is technically possible but not necessary under normal circumstances)
Cleaning in Assembled State:
As a basic rule, cleaning the device parts that are located in the interior of the container is NOT necessary. Self-cleaning takes place during the cleaning process.
Cleaning is carried out by simply rinsing the surfaces that come into contact with media (CIP cleaning).
Cleaning agents:
3% nitric acid
max. +60 °C (+140 °F)
3% caustic soda
max. +80 °C (+176 °F)
Cleaning in Disassembled State:
Prior to cleaning, the device must have been removed from the container by an expert. The safety instructions in section 7.1 Safety Instructions for Maintenance must be observed. Cleaning of the device can be carried out by instructed persons. After cleaning, the device must be assembled, checked and reinstalled in the container by an expert (see section 5.2 Installation )
NOTE
Environmental damage in case of improper disposal! Cleaning agents, consumables and lubricants must NOT be allowed to get into the
groundwater, waterways or sewer system. There is a risk of environmental damage.
Dispose of any cleaning agents, lubricants and consumables (e.g. brushes and cloths) which have been used for cleaning in accordance with the local regulations and in accordance with the information in the manufacturer’s safety data sheets. Dispose of packaging materials in an environmentally friendly manner and recycle them.
62/79
Translation-Operating/Installation Instructions 2017/10
7 Maintenance
Powered by FlippingBook