TANKO® CP_IOM_Rev5

TANKO®-CP Jet Cleaner

The device is intended exclusively for the purpose outlined above. Any other use beyond that described here or alteration of the device without written approval from the manufacturer is considered IMPROPER use. The manufacturer accepts NO liability for damage arising from this. The owner/operating company is solely responsible for the risk. The device must not be put into operation until it has been assured that all the safety devices are fully functional and the plant in which the device is installed meets the safety requirements of all relevant European directives (e.g. the Machinery Directive).

2.2 Spare Parts, Replacement Parts and Accessories

WARNING

Risk of damage, malfunction or complete failure of the device! Incorrect or faulty spare/replacement parts and accessories put the functional safety and reliability of the device at risk. There is a risk of death or severe physical injuries. The failure of components or a device malfunction can cause material damage and consequential damages.

 Use only the manufacturer's original spare parts.

We expressly draw attention to the fact that replacement parts and accessories NOT supplied by AWH have NOT been checked or approved by AWH. The installation and/or the use of such products could therefore under certain circumstances result in changes with negative results to the properties of the device specified by its design and the higher-level plant. AWH is not liable for any damage arising from the use of non-original parts or non-original accessory parts. Standard parts can be obtained from specialist dealers.

Section 3.1 Construction includes a list of spare parts.

8/77

Translation of the original operating/installation instructions 2016/10

2 Safety

Powered by