TANKO®-CP Jet Cleaner
– The operating company must provide personnel with personal safety clothing and equipment and make sure that this is used (see section 2.4.1 Personal Protective Equipment ). – The operating company must make sure that the danger area of the higher-level plant in which the device is installed is not accessible to unauthorized persons. – The operating company must make sure that no one is permitted to work on the device whose ability to react is impaired by drugs, alcohol, medication or similar. – The operating company must take appropriate measures to inform groups of persons who are not intended to come into direct contact with the device (e.g. visitor groups) about the potential dangers involved. – The operating company is responsible for making sure that the device is only ever operated in perfect condition. – Wherever high pneumatic pressures occur, there is a possibility of sudden failure of or damage to the lines and connections. This poses a hazard. The owner/operating company must instruct operating and maintenance personnel at least once a year on the possible hazards. – The constructor of the overall plant must install the switching and safety devices required for setting up, inspection, shutting down (including emergency shutdown), operation, maintenance, cleaning and repair. – The operating company must design the disconnection of the energy sources on the higher-level plant technically in such a way that the 7.2 described in section Switch-off Procedure can be adhered to. – The operating company must define and adhere to the intervals for inspections and control measures in accordance with the environment and media used. – The operating company must provide fire safety devices, e.g. the appropriate quantity of suitable hand-held fire extinguishers of the appropriate size, in easily accessible places and provide employees with training on fire safety. – Warnings in the documentation for externally supplied assembly units must be adhered to and incorporated into the risk assessments for the specific workplace.
Connections:
Before operating the machine with the device, the operating company must make sure that the local regulations are observed for assembly and installation and commissioning, if these tasks are performed by the operating company.
10/77
Translation of the original operating/installation instructions 2016/10
2 Safety
Powered by FlippingBook