TANKO®-CP Jet Cleaner
3.3 Technical data
The estimated safe service life of the device is 10 years with single-shift operation and the use of drinking water.
Prerequisite for this: the device must be maintained properly at the intervals specified in the section 7.4 Maintenance , and the wear parts must be replaced regularly.
Aggressive agents can reduce the service life of the device.
3.3.1 Operating temperature TANKO-CP2/CP2S and TANKO-CP3
Designation
TANKO-CP2
TANKO-CP2S
TANKO-CP3
Effective cleaning radius
2 m
3 m
Operating temperature (permitted): – Cleaning agent Sterilisation temperature (permitted): Ambient temperature (permitted): – Inside the container – Outside the container
max. +95°C / +203°F
max. +121°C / +249°F
max. +140°C (max. +284°F) NOTE Risk of frost! -20°C – +40°C (-4°F – +104°F)
Operating pressure: – Cleaning agent
3 – 12 bar / 44 – 174 psi
Optimum pressure range: – Cleaning agent
5 – 8 bar / 73 – 116 psi
Flow rate: – 360°
Thread
≈ 52.0 – 96.7 l/min (3.1 – 5.8 m³/h) ≈ 58.3 – 108.3 l/min (3.5 – 6.5 m³/h) ≈ 41.7 – 78.3 l/min (2.5 – 4.7 m³/h) ≈ 52.0 96.7 l/min (3.1 – 5.8 m³/h) ≈ 41.7 – 80.0 l/min (2.5 – 4.8 m³/h) ≈ 52.0 98.3 l/min (3.1 – 5.9 m³/h)
≈ 41.7 – 80.0 l/min (2.5 – 4.8 m³/h) ≈ 53.3 -101.7 l/min (3.2 – 6.1 m³/h) ≈ 40.0 – 75.0 l/min (2.4 – 4.5 m³/h) ≈ 50.0 96.7 l/min (3.0 – 5.8 m³/h) ≈ 38.3 – 73.3 l/min (2.3 – 4.4 m³/h) ≈ 50.0 93.3 l/min (3.0 – 5.6 m³/h)
≈ 115.0 – 211.7 l/min (6.9 – 12.7 m³/h)
Clip-on
– 180° top Thread
≈ 103.3 – 190.0 l/min (6.2 – 11.4 m³/h)
Clip-on
– 180° bottomThread
Clip-on
≈ 103.3 – 190.0 l/min (6.2 – 11.4 m³/h)
Installation opening min.: – BSP/NPT connection – Clip-on connection
Ø 50 mm Ø 50 mm
Ø 48 mm Ø 48 mm
Ø 72 mm
Media connection [MC]:
3/4 ” BSP / NPT / clip-on for pipe outer Ø 25.4 mm
1 1/2 ” BSP / NPT
18/77
Translation of the original operating/installation instructions 2016/10
3 Construction and Function
Powered by FlippingBook