TANKO® CP_IOM_Rev5

TANKO®-CP Jet Cleaner

NOTE Risk of dirt and foreign objects in the device!

Functional safety and reliability may be compromised.

 During assembly, make sure and check that there is no dirt or foreign objects in the device (e.g. small particles, sealing material).

1. Remove the screw cap/sealing plug from the media connection [MC].

2. Screw the female thread in the connection cover (4) to the pipe for the media supply.

NOTE There is a risk of damage to the thread if the tightening torque applied for the threaded connection between the connection cover and the pipe is excessive!  The tightening torque value for the threaded connections between the connection cover and pipe depends on the material of the pipe for the media supply. 3. Tighten the threaded connection between the connection cover and the pipe using an open-ended wrench or adjustable pliers wrench, as shown in Picture 5.2-8 .

34/77

Translation of the original operating/installation instructions 2016/10

5 Installation