TANKO®-CP Jet Cleaner
7.3.1 Removing the Device
For clip-on connection (see Picture 5.2-7: Clip-on connection ):
WARNING Risk of the device falling accidentally!
The device may strike personnel when falling.
There is a risk of severe physical injuries.
Hold the device firmly when installing/removing it.
There must be nobody beneath the device when installing/removing it.
1. Pull the cotter pin (12) from the connection pin (11).
2. Remove the connection pin (11).
3. Detach the device from the pipe for the media supply.
For threaded connection (see Picture 5.2-8: Threaded connection installation ):
WARNING Risk of the device falling accidentally!
The device may strike personnel when falling.
There is a risk of severe physical injuries.
Hold the device firmly when installing/removing it.
There must be nobody beneath the device when installing/removing it.
1. Unfasten the connection cover threaded connection - media supply pipe with an open-end wrench or an adjustable pliers wrench.
2. Unscrew the device from the pipe for the media supply.
7.4 Maintenance
To ensure the trouble-free operation, high operational safety and long service life of the cleaning device, it is imperative to have it cleaned and maintained at regular intervals.
We recommend that you document the maintenance work in a report.
The safety notes in section 7.1 Safety Notes for Maintenance must be adhered to when carrying out cleaning, maintenance and repair work.
46/77
Translation of the original operating/installation instructions 2016/10
7 Maintenance
Powered by FlippingBook