TANKO® CP_IOM_Rev5

TANKO®-CP Jet Cleaner

NOTE

Edge compression in the area of the wrench flats! If workpieces are NOT grasped without play and in a protective manner by the flats during assembly/disassembly, then they are at risk of damage:  To avoid causing damage during assembly/disassembly work, use an adjustable wrench with parallel, smooth clamping jaws.  Apply the clamping jaws of the adjustable wrench or pliers wrench to the flats without play so that they rest evenly across the surface and loosen or tighten the screwed part.

The tools required for assembly/disassembly work are listed in section 7.4.2 Tools and Tightening Torque Values.

51/77

7 Maintenance Translation of the original operating/installation instructions 2016/10