TANKO®-CP Jet Cleaner
The assembly tool ensures that the plain bearing bushing (8) is pressed into the shaft (2) to the correct depth.
Assembly tool
Picture 7.4-8: Installation using assembly tool for plain bearing bushing CP3
4. Push the sliding disk (7) onto the shaft (2).
5. Insert the shaft (2), together with the sliding disk (7), into the bottom section of the housing (4) and into the collar bushing (5) from above. 6. Insert the inflow disk (1) into the plain bearing bushing (8) in the shaft (2) so that the inflow disk (1) rests flush on the support edge in the housing (3).
7. Screw a connection cover (5) into the housing (3).
8. Fasten the connection cover (5) with tightening torque as per Table 7.5-17: Torques CP3.
Installing the Device
The device is fully assembled and is ready for installation (see section 5.2 Installation ) on the plant.
59/77
7 Maintenance Translation of the original operating/installation instructions 2016/10
Powered by FlippingBook