TANKO®-CP Jet Cleaner
Environmental damage, in case of improper disposal! Cleaning agents, consumables and lubricants must NOT be allowed to enter the groundwater, waterways or sewerage system. There is a risk of environmental damage. Dispose of any cleaning agents, lubricants and consumables (e.g. brushes and cloths) which have been used for cleaning in accordance with the local regulations and in accordance with the information in the manufacturer’s safety data sheets. Dispose of packaging materials in an environmentally friendly manner and turn them in for recycling.
7.5 Spare Parts and Customer Service
Spare Parts and Wear Parts
The individual parts identified with a cross in Table 7.5-1: TANKO-CP2 parts list , Table 7.5-7: TANKO- CP2S parts list and Table 7.5-13: TANKO-CP3 parts list are included in the wearing parts kit, article number 66901000V0000. It can be purchased from AWH. Subject to technical modifications in the interest of further development and improvement to the properties of the device. The Article No., dimensions or materials may differ from those of the supplied device.
The following data is important when requesting spare parts and for all inquiries:
Device
Type
–
Serial number
–
Spare part
Designation
–
Article No.
–
Customer Service
For technical questions or spare part requests, you can contact the Customer Service department as follows: Armaturenwerk Hötensleben GmbH Schulstraße 5 – 6 39393 Hötensleben, Germany
Tel: +49 39405 92-0 E-mail info@awh.eu Internet http://www.awh.eu
61/77
7 Maintenance Translation of the original operating/installation instructions 2016/10
Powered by FlippingBook