TANKO® MX_IOM_Rev0

Jet Cleaner TANKO-MX

1.2 Warranty and Liability

The commitments agreed in the contract of supply and delivery, the general terms and conditions and the terms of delivery of Armaturenwerk Hötensleben GmbH (referred to hereinafter as AWH) and the statutory regulations valid at the time the contract was concluded shall apply. Warranty and liability claims in the case of personal injury and damage to property shall be excluded in particular if these can be attributed to one or more of the following causes: – Improper or incorrect use of the device, – Improper assembly and installation, commissioning, operation and maintenance of the device, – Failure to observe the instructions in the instructions regarding assembly and installation, commissioning, operation and maintenance of the device, – Constructional modifications to the device (conversions or other modifications to the device must not be made without previous written approval from AWH. In case of infringement, the device will lose its EC conformity and the operating authorization), – Use of spare parts that do not meet the specified technical requirements. – Improperly performed repairs, – Disasters, the effects of foreign objects and force majeure. Exclusion of Liability AWH reserves the right to make alterations to this document at any time and without prior notice. AWH provides no guarantee (neither expressed nor implied) with regard to all information in this document, including but not limited to the implied warranty of merchantability and suitability for a particular purpose. Furthermore, AWH does not guarantee the correctness or completeness of information, text, graphics or other parts in this document.

1.3 Product Names and Trademarks

The product names and trademarks included in these instructions are brands or registered trademarks of the respective owners. TANKO ® and AWH ® are registered trademarks of Armaturenwerk Hötensleben GmbH.

1.4 Related Documents

The following documents contain possible supplementary information for these instructions: – Manufacturer's declaration and/or certificates of conformity – Certificates – Additional documents for any attached or upstream components, e.g. Drawings, technical data, information on accessories etc. – Supplements to these instructions (e.g. special versions) – AWH catalog, product data sheet

4 / 86

Translation of the original operating/installation instructions 2016/03

1 Introduction

Powered by