Jet Cleaner TANKO-MX
WARNING
Danger from the incorrect use of materials/agents! The materials/agents to be used for the intended operation of the device are procured and utilized by the operating company for the device. The selection of materials/agents is the responsibility of the operating company. There is a risk of death or severe physical injuries. The proper treatment of these materials/agents is solely the responsibility of the operating company. When selecting the materials/agents, make sure that the permitted technical parameters of the device are NOT exceeded. The cleaning agents and media must be approved for all of the materials of the device (e.g. washers, bushings) and for the substances in the container being cleaned which come into contact with them. Adhere to the specified chemical limitations for use in the material data sheets. Adhere to the safety data sheets supplied by the manufacturers of the materials and media, in particular for hazardous substances: – Comply with the hazard and disposal instructions. – Set out protective measures and compile operating instructions for hazardous substances. – This also applies to hazardous substances that may arise during work processes.
Refer to the order confirmation / parts list from AWH for the materials used in the device.
The TANKO-MX is a rotating cleaning device and belongs to the group of jet cleaners. The device is driven by the cleaning agent. The device is used for cleaning the interiors of containers with and without installed equipment. For the purpose of these instructions containers are enclosed, depressurized tanks, silos, barrels, containers, pipes, etc., which are provided with an outlet that ensures a free flow of the supplied cleaning fluid. The pressure in the container to which the device is attached may not exceed a maximum of 0.5 bar (7.25 psi). The device was developed, engineered and built exclusively for industrial and commercial use. It must not be used for private use. In all cases, the operating company must check whether the device is suitable for its application. The device can be used in containers inside and outside of buildings in compliance with the limitations for use (see section 3.3 Technical Data ).
2 Safety
Translation of the original operating/installation instructions 2016/03
7 / 86
Powered by FlippingBook