Jet Cleaner TANKO-MX
Installation opening - Stationary device
See section 5.2.1 Ø 125 mm / 5 in
- Mobile device
> Ø 160 mm / 6¼ in
Orbital nozzle movement
Ball Ø 150 mm / 6 in
Materials - In contact with media
1.4404/08 (AISI 316L) C-PTFE; PEEK+PTFE,
- Other
1.4401 (AISI 316)
3.2 kg
Weight (standard)
Table 3.3-1: Operating parameters of the device
MX125 Variants (3 - 10 bar / 44 - 145 psi) – TANKO-MX125-G14
1x 4 nozzles Ø 4.0 mm 1x 4 nozzles Ø 5.0 mm 1x 4 nozzles Ø 6.0 mm
– TANKO-MX125-G14 – TANKO-MX125-G14
Figure 3.3-1: Chart - MX125 flow
Consumption data and operating pressure for the cleaning process: The specified values for consumption in the charts are average values and may fluctuate by approx. 10% in normal operation. They apply to operation with clear water as the cleaning fluid at a temperature of +25°C / +77°F.The values may differ if a different cleaning agent is used and if the temperature is different. The consumption of cleaning fluid in TANKO-MX devices depends on multiple factors, e.g. the pressure of the cleaning fluid and the size of the nozzle openings. An increase in pressure leads to increased consumption (throughput). The permitted range for the operating pressure of the cleaning agent must be adhered to.
The recommended operating pressure for the device is 4 - 8 bar / 58 – 116 psi.
3 Construction and Function Translation of the original operating/installation instructions 2016/03
19 / 86
Powered by FlippingBook