Jet Cleaner TANKO-MX
6 Commissioning Before the device is commissioned in Germany, the operating company of the plant must adhere to the Industrial Safety Regulation (BetrSichV). In other countries, the respective national guidelines, statutes and country-specific regulations regarding occupational safety and the prevention of accidents must be adhered to.
WARNING
Hazardous situations when commissioning as a result of incorrect installation of the device! There is a risk of death or severe physical injuries. As a basic rule, commissioning of the device (with cleaning agent) must not be performed until the following has been checked: – Correct mechanical installation of the device on / in the container. – The safe and reliable functioning of the device
6.1 Safety Notes for Commissioning
Before the device is commissioned, the operating company must ensure that local regulations are observed during commissioning.
We recommend that you document commissioning in a report.
WARNING
Risk of burns from hot surfaces! Failure to observe this can lead to death or sever physical injuries. The device is supplied without additional measures to provide protection from hot surfaces. The device may heat up significantly as a result of the cleaning fluid or the heat transfer from the container. There is a risk of skin burns if you touch the device! There is a risk of burns from cleaning agent at temperatures of more than +60 °C / +140 °F. Insulate hot surfaces. Secure hot surfaces with a guard or barriers.
Put up warning signs in the direct vicinity of the hot surfaces. Use protective work clothing and protective gloves when working.
34 / 86
Translation of the original operating/installation instructions 2016/03
6 Commissioning
Powered by FlippingBook