Jet Cleaner TANKO-MX
When operating the device, adhere to the following additional instructions: WARNING Persons in the container! A person may be struck by the jets from the cleaning head. There is a risk of death or severe physical injuries. DO NOT start cleaning operation while there are persons in the container! NEVER direct the cleaning jet at persons.
WARNING Incorrect operation of the device! There is a risk of death or severe physical injuries. Only operate the device when it is in perfect condition. Only operate the device when installed inside an enclosed container. Drain and depressurize the container being cleaned. Close all of the openings on the container (e.g. inspection openings). When operating the device, adhere to the switch-on and switch-off procedures (see sections 6.3 Switch-on procedure and 7.2 Switch-off procedure ). There is no need for the device to be run in. The following operating states of the device are NOT permitted! – Operation of the device without cleaning agent. – Immerse the device in the product of the production process. – Operation of the device outside the permitted parameters (see section 3.3 Technical Data) . Immediately stop operation in the event of leaks outside the container!
Refrain from any type of work which compromises the safe and reliable function of the device. Immediately inform the operating company of any changes to the device or the plant that may impair its safety. If you notice vibrations on the plant while commissioning the device, which are NOT generated by the device, they must be prevented with suitable measures so that the vibrations CANNOT be transmitted to the device. If this is NOT possible, the maintenance intervals in section 7.4.1 Maintenance Intervals have to be shortened accordingly! During normal operation of the device, you must make sure that the mixture of supplied cleaning agent and removed substances can flow freely from the container. NOTE Clogging in the drain of the container is to be eliminated at once so that: – no large quantities of dirt can collect in the container, – the container DOES NOT fill up with cleaning agent which is not permitted, – the device is NOT immersed as fluid level rises. For cleaning agent in circulation: Run the final cleaning step with clean water to remove any suspended matter which may have been introduced.
40 / 86
Translation of the original operating/installation instructions 2016/03
6 Commissioning
Powered by FlippingBook