Jet Cleaner TANKO-MX
7 Maintenance The following safety notes apply to all work on the device that is listed and described in this chapter and must be always adhered to. Only use original spare parts when replacing parts! A functional check has to be performed after every repair (see section 6.2 Functional Check / Trial Run ).
7.1 Safety Notes for Maintenance
DANGER
Risk of fatal injury from electric shock in case of contact with live components! Activated electrical components are live with dangerous electrical voltage and may perform uncontrolled movements. There is a risk of death or severe physical injuries. Only allow work on the electrical system to be carried out by qualified electricians . Before starting work, adhere to the working steps of the switch-off procedure (see section 7.2 Switch-off procedure). Cover adjacent live parts to prevent contact. Beware of the hazards due to electrical current (e.g. warnings).
WARNING
Risk of accident caused by incorrectly performed maintenance and repair work! Improper maintenance, falling components or failure to adhere to the listed safety notes can cause accidents. There is a risk of death or severe physical injuries. Only allow work on the device to be performed by experts. Only work on the device when it is isolated from the electrical voltage, depressurized and in a cool state. Keep at a safe distance when working on the device. We recommend that you provide 1 m of space for free movement around the device and container.
7 Maintenance
Translation of the original operating/installation instructions 2016/03
41 / 86
Powered by FlippingBook