TANKO® MX_IOM_Rev0

Jet Cleaner TANKO-MX

7.4 Maintenance

To ensure trouble-free operation, high operational safety and a long service life of the cleaning device, it must be cleaned and maintained at regular intervals.

We recommend that you document the maintenance work in a report.

The safety notes in section 7.1 Safety Notes for Maintenance must be adhered to when carrying out cleaning, maintenance and repair work.

7.4.1 Maintenance Intervals

NOTE

Component failure due to vibration damage! During operation, vibration can cause screwed and clamped connections to work loose, or the device can be subjected to severe strain, leading to component failure. The failure of components or a device malfunction can cause material damage and consequential damages.  Check the installed device for loose connections at regular intervals.  Watch out for vibration damage during maintenance and checking.  Adapt the maintenance intervals according to the operating conditions of the plant. After commissioning, first start with short maintenance intervals. If no damage occurs, the maintenance intervals can be adapted gradually until reaching the intervals specified in the instructions.

Maintenance Intervals and Methods

Shorten the maintenance intervals by up to 30% in the event of: – Deviation from the preferred installation position of the device (see section 5.2.2 Installation Position), – Vibrations that occur in the plant which are NOT caused by the device and CANNOT be prevented. If the device is NOT operated for a longer period, we recommend that you check the device completely before re-commissioning to make sure that it is fully functional (see section 6.2. Functional Check / Trial Run ). The specified times of the maintenance intervals are based on single-shift operation (8 hours per working day, 12 months per year) of the device and operation with Cleaning agent: Water Media pressure: 8 bar / 116 psi Media temperature: +25 °C / +77 °F

48 / 86

Translation of the original operating/installation instructions 2016/03

7 Maintenance

Powered by