Jet Cleaner TANKO-MX
7.4.3 Disassembling the Device
NOTE
Risk of damage to the device as a result of improper assembly/disassembly work! Assembly/disassembly of the device which is NOT performed properly can cause damage to the device which puts the functional safety and reliability at risk when re- commissioning. The failure of components or a device malfunction can cause material damage and consequential damages. Use a vise with protective jaws, e.g. plastic or light metal, for clamping. Only use suitable tools which do not damage the surface. For assembly work, adhere to the specified tightening torque values (see section 7.5 Spare Parts and Customer Service).
NOTE
Edge compression in the area of the wrench flats! If workpieces are NOT grasped without play and in a protective manner by the flats, they are at risk from damage. For sparing, protective assembly/disassembly work, use an adjustable wrench with parallel, smooth clamping jaws. Apply the clamping jaws of the adjustable wrench or pliers wrench to the flats without play so that they rest evenly on the surface and unfasten or tighten the screwed part.
The tools required for assembly/disassembly work are listed in section 7.4.2 Tools and Tightening Torque Values.
7 Maintenance
Translation of the original operating/installation instructions 2016/03
53 / 86
Powered by FlippingBook