Jet Cleaner TANKO-MX
6. Slide the sliding disk (11) from the driver shaft (25). 7. Lever the spiral circlip (30) in front of the bearing plate (28) out of the internal groove on the shaft-axle connection (24), by inserting the flat tip of a small screwdriver on the removal notch, and screw it out in a spiral pattern.
8. Unfasten the bearing plate (28) with an adjustable face wrench (pin Ø 3 mm) and unscrew it from the shaft-axle connection (24). 9. Remove the driver shaft (25) from the shaft-axle connection (24) together with the bearing plate (28); collar bushing (08); cylindrical pin (35), bevel gear wheel for the nozzle carrier (26) and spiral circlip (31).
10. Slide the bearing plate (28) with the collar bushing (08) from the driver shaft (25). 11. Push the collar bushing (08) out of the bearing plate (28) with an auxiliary tool (e.g. drift).
7 Maintenance
Translation of the original operating/installation instructions 2016/03
55 / 86
Powered by FlippingBook