Jet Cleaner TANKO-MX
11. NOTE The spur gears (19; 20) have different gearing! Two different spur gears, type A and type B, must always be used. Press two collar bushings (04) into each of the spur gears (19; 20). 12. Push the axle for the planetary gear wheel (17) into the planetary carrier (16) and through the collar bushings (04) on the spur gears (19; 20).
A
B
13. Insert the spiral circlip (19) into the external groove on the planetary carrier (16) in a spiral pattern and allow it to engage in place. 14. Press the collar bushing (03) into the planetary carrier (16).
15. NOTE Assembling the planetary gear incorrectly can cause the gear wheels to jam! The gear wheels may become damaged and the cleaning head will not rotate. It must be possible to push the teeth of the spur gears (19; 20) and of spur gear (21) together easily so that they mesh and they must not jam. Push the planetary carrier (16), fully assembled with the axle for the planetary gear (17); collar bushing (04); spur gear (19; 20) and spiral circlip (19), with the collar bushing (03) onto the shaft of the spur gear (18). You must be able to rotate the planetary carrier by hand without any noticeable resistance.
66 / 86
Translation of the original operating/installation instructions 2016/03
7 Maintenance
Powered by FlippingBook